Steel pipes for pipelines for gas and combustible fluids EN 10208 (available only from production)
EN 10208-1 pipes of requirements class A – manufacture process dependent on producer
application: |
distribution of combustible media with determined working pressure for gas engineering and petrochemical industry (previously DIN 2470-1 with DIN 1626/1629 and DVGW – Working Sheet G 260/1) |
|||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
production method: |
– seamless: S |
|||||||||||||||
grade: |
|
|||||||||||||||
outer diameter: |
Ø 33,7 up to 1.626 mm (seamless up to 660 mm) |
|||||||||||||||
wall thickness: |
up to 40 mm |
|||||||||||||||
pipe type and production running: |
see EN 10108-1 Table 1 |
|||||||||||||||
diameter and ovality tolerance: |
see EN 10208-1 Table 6 |
|||||||||||||||
wall thickness tolerance: |
see EN 10208-1 Table 7 |
|||||||||||||||
max. value of radial joggle: |
see EN 10208-1 Table 10 |
|||||||||||||||
max. value of fusion weld excedance: |
see EN 10208-1 Table 11 |
|||||||||||||||
tests and requirements: |
see EN 10208-1 Table 12 i Table D.1 |
|||||||||||||||
straightness: |
0,2 % along whole length, in places <mm/m |
|||||||||||||||
PE coating: |
EN 10285 or EN 10287 in 3-layer extrusion moulding or building up method |
|||||||||||||||
marking: |
plant punch, EN standard, S – steel grade without seam, W – welded, for inspection test certificate – customer’s mark and identification number |
EN 10208-2 pipes of requirements class B – manufacture process dependent on producer
application: |
distribution of combustible media with determined pressure (previously DIN 17172) |
|||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
production method: |
– seamless: S |
|||||||||||||||||||||
grade: seamed and seamless: |
|
|||||||||||||||||||||
grade: seamless: |
|
|||||||||||||||||||||
grade: seamless: |
|
|||||||||||||||||||||
outer diameter: |
Ø 33,7 up to 1.626 mm (seamless up to 660 mm) |
|||||||||||||||||||||
wall thickness: |
up to 40 mm |
|||||||||||||||||||||
pipe type and production running: |
see EN 10208-2 Table 2 |
|||||||||||||||||||||
diameter and ovality tolerance: |
see EN 10208-2 Table 9 |
|||||||||||||||||||||
wall thickness tolerance: |
see EN 10208-2 Table 10 |
|||||||||||||||||||||
max. value of fusion weld excedance: |
see EN 10208-2 Table 15 |
|||||||||||||||||||||
straightness: |
0,2 % along whole length, locally < 4 mm/m |
|||||||||||||||||||||
PE coating: |
EN 10285 or EN 10287 in 3-layer extrusion moulding or surfacing by welding method |
|||||||||||||||||||||
marking: |
plant punch, EN standard, S – steel grade without seam, W – welded, for inspection test certificate – customer’s mark and identification number |
|||||||||||||||||||||
certificate: |
3.1A, 3.1B, 3.1C lub 3.2 |
Seamed steel pressure pipes EN 10217-1
from unalloyed steel with determined properties for normal temperatures (DIN 1626) |
||||||||||
---|---|---|---|---|---|---|---|---|---|---|
|
methods and production process, delivery state: see EN 10217-1 Table 1 |
|||||||||
application: |
according to DVGW, TRB, TRD and ADW standards |
|||||||||
grades: |
|
|||||||||
welding method: |
– pressure gas welding |
|||||||||
outer diameter: |
Ø 10,2 up to 2.540 mm |
|||||||||
wall thickness: |
up to 40 mm |
|||||||||
trade length: |
6, 12 m, partly also 18 m (other acc. to agreement) |
|||||||||
fixed length < 406,4: |
6.000 mm + 10 mm |
|||||||||
fixed length ≥ 406,4: |
6.000 mm + 25 mm |
|||||||||
dimensional tolerance: |
– outer diameter: ≤ 219,1 +/- 1,00 % lub +/- 0,5 mm – higher value each time |
|||||||||
straightness: |
1,5 : 1.000 for whole pipe, in places 3 : 1.000 mm |
|||||||||
fusion weld excedance:
|
– butt weld: inside + 0,5 mm/+ 0,05 x WD rolled from outside |
|||||||||
ovality: |
< 406,4: as limit value DA |
|||||||||
marking: |
plant punch, short name, welding method, EN standard, steel grade, for inspection test certificate – customer’s mark and identification number |
|||||||||
certificate: |
EN 10204 – 2.2, EN 10204 – 3.1.B lub 3.1C |
Seamless steel pressure pipes EN 10216
from unalloyed or fine-grained steel with determined properties for normal temperatures EN 10216-1, EN 10216-3 (DIN 1629) |
|||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
application: |
according to standards: DVGW, TRB, TRD i ADW |
||||||||||||
production method: |
TR 1 rolling forming or normalized, or normalizing rolled TR3 or normalized |
||||||||||||
grades: |
|
||||||||||||
outer diameter: |
Ø 10,2 up to 711 mm |
||||||||||||
wall thickness: |
up to 100 mm |
||||||||||||
trade length: |
from 4 up to 7 m, or double length |
||||||||||||
fixed length: |
< 6.000 mm + 10 mm |
||||||||||||
straightness: |
1,5 : 1.000 for whole pipe, in places 3 : 1.000 |
||||||||||||
dimensional tolerance: |
– outer diameter: +/- 1% lub +/- 0,5 mm – higher value each time |
||||||||||||
certificate: |
EN 10204-2.2 lub EN 10204-3.1.B |
from unalloyed and alloyed steel with determined properties for elevated temperature EN 10216-2 (DIN 17175)
application: |
boiler pipes for temperatures determined by grades, without determination of pressure level |
||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
grades: |
|
||||||||||||||||||
outer diameter: |
Ø 10,2 up to 711 mm |
||||||||||||||||||
wall thickness: |
up to 100 mm |
||||||||||||||||||
trade length: |
from 4 up to 7 m, or double length |
||||||||||||||||||
fixed length: |
acc. to agreement |
||||||||||||||||||
|
|
||||||||||||||||||
straightness: |
1,5 : 1.000 for whole pipe, in places 3 : 1.000 mm |
||||||||||||||||||
dimensional tolerance: |
– outer diameter: +/- 1% or +/- 0,5 mm – higher value each time |
||||||||||||||||||
marking: |
plant punch, EN standard, steel grade, heat no., TC1 test class, for unalloyed steel – TC2 test class, consumer’s mark, identification number |
||||||||||||||||||
certificate: |
EN 10204 – 3.1.B |
||||||||||||||||||
official regulations: |
DVGW, guidelines TRD, TRB, standards ADW |
Steel line pipes from structural general-purpose steel with and without seam acc. to EN 10224 (DIN 2460)
application: |
water conduction, also drinking water |
||||||
---|---|---|---|---|---|---|---|
production method: |
– without seam |
||||||
grade: |
|
||||||
seamless tubes: |
– diameter: Ø 88,9 up to 508 mm |
||||||
seamed tubes: |
– diameter: Ø 88,9 up to 2.020 mm |
||||||
selected length: |
according to agreement |
||||||
grade L235: |
certificate 2.2 |
||||||
grade L235: |
certification 3.1.B |
||||||
grade L355: |
certification 3.1.B |
||||||
certificate: |
EN 10204-2.2 or EN 10204-3.1.B |
||||||
marking: |
producer’s mark, for 3.1.B: user’s mark and identification number |
Seamed and seamless threaded steel line pipes EN 10255
(DIN 2440) – medium-heavy pipes |
application: |
fluid media with pressure up to 25 bars, gas media and air with pressure up to 10 bars |
---|---|---|
|
grade: |
1.0035 L 195 (St 33) |
|
seamless pipe: |
– diameter: Ø 1/4” up to 6” |
|
seamed pipe: |
– diameter: Ø 1/4” up to 6” |
|
pipe length deviation: |
– seamless: +/- 1 m |
|
wall thickness deviation: |
– 12,5 % |
|
weight deviation: |
+/- 10% for single pipe |
|
leaktightness test: |
pressure test with cold water with pressure of 50 bars or eddy currents test |
|
properties during cold bending: |
≤ 1” up to 3 x D |
|
galvanizing: |
– WN 10240: layer thickness – min 56 μm/400 g/m2 |
|
marking: |
– black: material marking at pipe end |
|
certificate: |
test report EN 10204 – 2.2 |
Seamed cold-rolled structural pipes EN 10219
|
application: |
steel structures, machine, vehicle and equipment building, agricultural machinery |
||||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
production method: |
electric resistance welded without heat treatment, non-annealed fusion weld (annealing – after special agreement) |
||||||||||||||||||||||||||||||||||||||||||
from unalloyed steel |
grade: |
|
||||||||||||||||||||||||||||||||||||||||||
from unalloyed steel |
grade: |
|
||||||||||||||||||||||||||||||||||||||||||
|
outer diameter: |
21,3 up to 1.219,0 mm |
||||||||||||||||||||||||||||||||||||||||||
|
wall thickness: |
up to 30 mm |
||||||||||||||||||||||||||||||||||||||||||
|
trade length: |
from 6 up to 15 m, special length – 18 m |
||||||||||||||||||||||||||||||||||||||||||
|
fixed length: |
acc. to agreement |
||||||||||||||||||||||||||||||||||||||||||
|
straightness: |
0,2% along whole length |
||||||||||||||||||||||||||||||||||||||||||
|
dimensional tolerance: |
outer diameter: +/- 1%, min +/- 0,5 mm, max +/- 10 mm |
||||||||||||||||||||||||||||||||||||||||||
|
ovality: |
2 % with D/WD ratio max = 100 |
||||||||||||||||||||||||||||||||||||||||||
|
marking: |
plant punch, EN standard, steel grade as steel or colour punch |
||||||||||||||||||||||||||||||||||||||||||
|
certificates for quality group: |
JR and JO: EN 10204 – 2.2, EN 10204 – 3.1B |
||||||||||||||||||||||||||||||||||||||||||
|
certificates for quality group: |
J2 + fine-grained: EN 10204 – 3.1.B or 3.1C |
Seamed and seamless hot-rolled structural pipes EN 10210
|
application: |
steel structures, machine, vehicle and equipment building, agricultural machinery |
||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
production method: |
– seamles |
||||||||||||||||||
from unalloyed steel |
grade: |
|
||||||||||||||||||
from fine-grained steel |
grade: |
|
||||||||||||||||||
|
outer diameter: |
21,3 up to 1.219,0 mm |
||||||||||||||||||
|
wall thickness: |
up to 50 mm |
||||||||||||||||||
|
trade length: |
– seamless pipe: 5 up to 7 m or double length |
||||||||||||||||||
|
fixed length: |
acc. to agreement |
||||||||||||||||||
|
straightness: |
0,2 %: along whole length for circular pipes |
||||||||||||||||||
|
dimensional tolerance: |
– for outer diameter: +/- 1 %, min +/- 0,5 mm, max +/- 10 mm |
||||||||||||||||||
|
ovality: |
2 % |
||||||||||||||||||
|
fusion weld excedance: |
wall thickness ≤ 14,2 mm: max 3,5 |
||||||||||||||||||
|
powder welding (UP): |
wall thickness > 14,2 mm: max 4,8 mm |
||||||||||||||||||
|
marking: |
plant punch, EN standard, steel grade, with steel and colour punch |
||||||||||||||||||
|
certificates for quality group: |
JR and JO: EN 10204 – 2.2 |
||||||||||||||||||
|
certificates for quality group: |
J2 + fine-grained: EN 10204 – 3.1.B or 3.1C |
LINE PIPES |
||||
Screwed steel line pipes EN 10255 |
||||
---|---|---|---|---|
(DIN 2440) |
application: |
fluid media up to the pressure of 25 bars, gas media as well as air up to the pressure of 10 bars |
||
|
diameter / length: |
seamless: Ø 1/4" up to 6" / 6 m (other acc. to agreement) |
||
(DIN 2460) |
application: |
for water conveyance, also for drinking water |
||
|
diameter / thickness / length: |
seamless: Ø 88,9 up to 508 mm / up to 11 mm / 5 up to 7 m or double length |
Seamless steel pressure pipes EN 10216
PRESSURE PIPES |
||
---|---|---|
Seamless steel pressure pipes EN 10216 |
||
EN 10216-1, EN 10216-3 (DIN 1629) |
application: |
acc. to: DVGW, TRB, TRD i ADW |
|
diameter / wall / length: |
Ø 10,2 up to 711 mm / up to 100 mm / od 4 up to 7 m (the others – acc. to agreement) |
EN 10216-2 (DIN 17175) |
application: |
boiler tubes for temperatures determined by grades and without determination of pressure level |
|
diameter / wall / length: |
Ø 10,2 up to 711 mm / up to 100 mm / od 4 up to 7 m or double length: |
Seamed steel pressure pipes EN 10217-1 |
||
(DIN 1626) |
application: |
acc. to: DVGW, TRB, TRD i ADW |
|
diameter / wall / length: |
Ø 10,2 up to 2.540 mm / up to 40 mm / 6, 12 m, partly 18 m (other – acc. to agreement) |
SEAMLESS STEEL TUBES for mechanical engineering and universal technical applications EN 10297-1
SEAMLESS STEEL TUBES for mechanical engineering and universal technical applications EN 10297-1 |
||
from unalloyed steel |
application: |
tubes with circular intersection for machine building and general technical use |
|
diameter / wall / length: |
Ø 26,9 up to 610 mm / up to 100 mm / od 4 up to 7 m, or double length: |
Seamed and seamless structural pipes, hot-rolled EN 10210
STRUCTURAL PIPES |
||
---|---|---|
Seamed and seamless structural pipes, hot-rolled EN 10210 |
||
from unalloyed steel |
application: |
steel structures, machine, vehicle and equipment building, agricultural machinery |
from fine-grained steel |
diameter / wall: |
Ø 21,3 up to 1.219 mm, (seamless up to 660 mm) / up to 50 mm |
|
length: |
seamless: od 5 up to 7 m, or double length |
Seamed structural pipes, cold-rolled EN 10219 |
||
from unalloyed steel (DIN 17120) |
application: |
steel, structures, machine, vehicle and equipment building, agricultural machinery |
|
diameter / wall / length: |
Ø 21,3 up to 1.219 mm / up to 30 mm / od 6 up to 15 m, special length 18 m, |
STEEL LINE PIPES for gas and combustible media EN 10208 (available only from production)
STEEL LINE PIPES for gas and combustible media EN 10208 (available only from production) |
||
---|---|---|
EN 10208-1 requirement class A |
application: |
distribution of flammable media with determined pressure for gas engineering and petrochemical industry |
|
diameter / wall / length: |
Ø 33,7 up to 1.626 mm, (seamless up to 660 mm) / up to 40 mm |
EN 10208-2 requirement class B |
application: |
distribution of flammable media with determined pressure |
|
diameter / wall / length: |
Ø 33,7 up to 1.626 mm, (seamless up to 660 mm) / up to 40 mm |
PRECISE PIPES EN 10305
PRECISE PIPES EN 10305 |
||
---|---|---|
EN 10305-1 |
application: |
automotive industry, machine and equipment building |
|
diameter / wall: |
Ø 4,0 up to 165,0 mm / 0,5 mm up to 10,0 mm |
EN 10305-4 |
application: |
hydraulic and pneumatic elements |
|
diameter / wall: |
Ø 4,0 up to 75,0 mm / 0,5 up to 12,5 mm |
EN 10305-2 |
application: |
automotive industry, machine and equipment building |
|
diameter / wall: |
Ø 10,0 up to 125,0 mm / 1,0 mm up to 6,0 mm |
EN 10305-3 |
application: |
furniture industry, sport equipment and other, automotive industry, machine-building industry |
|
diameter / wall: |
Ø 6,0 up to 120,0 mm / 0,7 up to 3,0 mm |
No. |
Grade |
Grade |
Yield |
Tensile |
Ultimate |
Impact |
Carbon |
|
|
|
|
|
|
|
|
|
|
|
|||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
EN10027-2 |
acc. to |
acc. to |
ReH min |
Rm min |
A5 |
KV J/ºC |
CEV |
C |
Si |
Mn |
P |
S |
N |
Al |
Cr |
Mo |
Ni |
V |
Cu |
Nb |
Ti |
EN 10255 (DIN 2440 / 2441) steel line pipes, screwed, with or without seam
EN 10255 (DIN 2440 / 2441) steel line pipes, screwed, with or without seam |
||||||||
---|---|---|---|---|---|---|---|---|
1.0032 |
L 195 |
St 33 |
185 |
310-540 |
|
0,20 |
|
1,40 |
|
|
|
|
|
|
|
|
|
EN 10244 (DIN 2460) steel line pipes from structural steel, with or without seam |
||||||||
1.0252 |
L 235 |
St 37.0 |
235 |
360-500 |
25 |
0,16 |
0,35 |
1,20 |
1.0419 |
L 355 |
St 52.0 |
355 |
500-650 |
21 |
0,22 |
0,55 |
1,60 |
|
|
|
|
|
|
|
|
|
1.0107 |
P 195 TR 1 |
St 33 |
1951 |
320-440 |
27 |
0,13 |
0,35 |
0,70 |
1.0254 |
P 235 TR 1 |
St 37.0 |
2351 |
360-500 |
25 |
0,16 |
0,35 |
1,20 |
1.0258 |
P 265 TR 1 |
St 44.0 |
2651 |
410-570 |
21 |
0,20 |
0,40 |
1,40 |
1.0348 | P 195 GH | UH 1 | 1952 | 130 | 320-440 | 27 | 40 / 0º | 0,13 | 0,35 | 0,70 | 0,025 | 0,020 | 0,020 | 0,30 | 0,08 | 0,30 | 0,02 | 0,30 | 0,01 | 0,04 |
1.0345 | P 235 GH | St 35.8 / H1 | 2352 | 150 | 360-500 | 25 | 40 / 0º | 0,16 | 0,35 | 1,20 | 0,025 | 0,020 | 0,020 | 0,30 | 0,08 | 0,30 | 0,02 | 0,30 | 0,01 | 0,04 |
1.0425 | P 265 GH | St 45.8 | 2652 | 171 | 410-570 | 23 | 40 / 0º | 0,20 | 0,40 | 1,40 | 0,025 | 0,020 | 0,020 | 0,30 | 0,08 | 0,30 | 0,02 | 0,30 | 0,01 | 0,04 |
1.5415 | 16Mo 3 | 15Mo3 | 2802 | 205 | 450-600 | 22 | 40 / 20º | 0,12-0,20 | 0,35 | 0,40-0,90 | 0,025 | 0,020 | <0,040 | 0,30 | 0,25-0,35 | 0,30 | – | 0,30 | – | – |
1.7335 | 13CrMo 4-5 | 13CrMo 4 4 | 2902 | 236 | 440-590 | 22 | 40 / 20º | 0,10-0,17 | 0,35 | 0,40-0,70 | 0,025 | 0,020 | <0,040 | 0,70-1,15 | 0,40-0,60 | 0,30 | – | 0,30 | – | – |
1.7380 | 10CrMo 9-10 | 10CrMo 9 10 | 2802 | 224 | 480-630 | 22 | 40 / 20º | 0,08-0,14 | 0,50 | 0,30-0,70 | 0,025 | 0,020 | <0,040 | 2,00-2,50 | 0,90-1,10 | 0,30 | – | 0,30 | – | – |
1.0562 | P 355 N | ST 52.0 | 3553 | 490-650 | 22 | 0,20 | 0,50 | 0,90-1,70 | 0.025 | 0,020 | 0,020 | 0,30 | 0,08 | 0,50 | 0,10 | 0,30 | 0,50 | 0,04 |
EN 10219 (DIN 59411) seamed structural pipes, cold-rolled from fine-grained steel
1.0493 | S 275 NH | StE 285 N | 2751 | 370-540 | 24 | 40/-20º | 0,40 | 10,2 | 0,40 | 0,50-1,40 | 0,035 | 0,030 | 0,015 | 0,020 | 0,30 | 0,10 | 0,30 | 0,05 | 0,35 | 0,05 | 0,03 |
1.0497 | S 275 NLH | T StE 285 N | 2751 | 370-540 | 24 | 27/-50º | 0,40 | 0,20 | 0,40 | 0,50-1,40 | 0,030 | 0,025 | 0,015 | 0,020 | 0,30 | 0,10 | 0,30 | 0,05 | 0,35 | 0,05 | 0,03 |
1.0539 | S 355 NH | StE 355 N | 3551 | 470-630 | 22 | 40/-20º | 0,43 | 0,20 | 0,50 | 0,90-1,65 | 0,035 | 0,030 | 0,015 | 0,020 | 0,30 | 0,10 | 0,50 | 0,12 | 0,35 | 0,05 | 0,03 |
1.0549 | S 355 NLH | T StE 355 N | 3551 | 470-630 | 22 | 27/-50º | 0,43 | 0,18 | 0,50 | 0,90-1,65 | 0,030 | 0,025 | 0,015 | 0,020 | 0,30 | 0,10 | 0,50 | 0,12 | 0,35 | 0,05 | 0,03 |
1.8953 | S 460 NH | StE 460 N | 4601 | 550-720 | 17 | 40/-20º | – | 0,20 | 0,60 | 1,00-1,70 | 0,035 | 0,030 | 0,025 | 0,020 | 0,30 | 0,10 | 0,80 | 0,20 | 0,70 | 0,05 | 0,03 |
1.8956 | S 460 NLH | T StE 460 N | 4601 | 550-720 | 17 | 27/-50º | – | 0,20 | 0,60 | 1,00-1,70 | 0,030 | 0,025 | 0,025 | 0,020 | 0,30 | 0,10 | 0,80 | 0,20 | 0,70 | 0,05 | 0,03 |
1.8843 | S 275 MH | 2751 | 360-510 | 24 | 40/-20º | 0,34 | 0,13 | 0,50 | 1,50 | 0,035 | 0,030 | 0,020 | 0,020 | – | 0,20 | 0,30 | 0,08 | – | 0,05 | 0,05 | |
1.8844 | S 275 MLH | 2751 | 360-510 | 24 | 27/-50º | 0,34 | 0,13 | 0,50 | 1,50 | 0,030 | 0,025 | 0,020 | 0,020 | – | 0,20 | 0,30 | 0,08 | – | 0,05 | 0,05 | |
1.8845 | S 355 MH | 3551 | 450-610 | 22 | 40/-20º | 0,39 | 0,14 | 0,50 | 1,50 | 0,035 | 0,030 | 0,020 | 0,020 | – | 0,20 | 0,30 | 0,10 | – | 0,05 | 0,05 | |
1.8846 | S 355 MLH | 3551 | 450-610 | 22 | 27/-50º | 0,39 | 0,14 | 0,50 | 1,50 | 0,030 | 0,025 | 0,020 | 0,020 | – | 0,20 | 0,30 | 0,10 | – | 0,05 | 0,05 | |
1.8847 | S 420 MH | 4201 | 500-660 | 19 | 40/-20º | 0,43 | 0,16 | 0,50 | 1,70 | 0,035 | 0,030 | 0,020 | 0,020 | – | 0,20 | 0,30 | 0,12 | – | 0,05 | 0,05 | |
1.8848 | S 420 MLH | 4201 | 500-660 | 19 | 27/-50º | 0,43 | 0,16 | 0,50 | 1,70 | 0,030 | 0,025 | 0,020 | 0,020 | – | 0,20 | 0,30 | 0,12 | – | 0,05 | 0,05 | |
1.8849 | S 460 MH | 4601 | 530-720 | 17 | 40/-20º | – | 0,16 | 0,60 | 1,70 | 0,035 | 0,030 | 0,025 | 0,020 | – | 0,20 | 0,30 | 0,12 | – | 0,05 | 0,05 | |
1.8850 | S 460 MLH | 4601 | 530-720 | 17 | 27/-50º | – | 0,16 | 0,60 | 1,70 | 0,030 | 0,025 | 0,025 | 0,020 | – | 0,20 | 0,30 | 0,12 | – | 0,05 | 0,05 |
EN 10208-1 (DIN 2470-1 z DIN 1626 / 1629) steel line pipes for gas and combustible media – A requirement class
1.0319 | L 210 GA | RRStE 210.7 | 210 | 335-475 | 25 | 0,21 | 0,40 | 0,90 | 0,030 | 0,030 | 0,015-0,060 |
1.0458 | L 235 GA | St 37.0 | 235 | 370-510 | 23 | 0,16 | 0,40 | 1,20 | 0,030 | 0,030 | 0,015-0,060 |
1.0459 | L245 GA | RRStE 240.7 | 245 | 415-555 | 22 | 0,20 | 0,40 | 1,15 | 0,030 | 0,030 | 0,015-0,060 |
1.0483 | L 290 GA | St 44.0 | 290 | 415-555 | 21 | 0,20 | 0,40 | 1,40 | 0,030 | 0,030 | 0,015-0,060 |
1.0499 | L 360 GA | St 52.0 | 360 | 460-620 | 20 | 0,22 | 0,55 | 1,45 | 0,030 | 0,030 | 0,015-0,060 |
EN 10208-2 (DIN 17172) steel line pipes for gas and combustible media – B requirement class
1.0457 | L 245 NB | StE 240.7 | 245-440 | 415 | 22 | 40 | 0,42 | 0,16 | 0,40 | 1,10 | 0,025 | 0,020 | 0,015-0,060 | — | — | — |
1.0484 | L 290 NB | StE 290.7 | 290-440 | 415 | 21 | 40 | 0,42 | 0,17 | 0,40 | 1,20 | 0,025 | 0,020 | 0,015-0,060 | 0,05 | 0,05 | 0,04 |
1.0582 | L 360 NB | StE 360.7 | 360-510 | 460 | 20 | 40 | 0,45 | 0,20 | 0,45 | 1,60 | 0,025 | 0,020 | 0,015-0,060 | 0,10 | 0,05 | 0,04 |
1.8972 | L 415 NB | StE 415.7 | 415-565 | 520 | 18 | 40 | w/uzg | 0,21 | 0,45 | 1,60 | 0,025 | 0,020 | 0,015-0,060 | 0,15 | 0,05 | 0,04 |
1.8948 | L 360 QB | 360-510 | 460 | 20 | 40 | 0,42 | 0,16 | 0,45 | 1,40 | 0,025 | 0,020 | 0,015-0,060 | 0,05 | 0,05 | 0,04 | |
1.8947 | L 415 QB | 415-565 | 520 | 18 | 40 | 0,43 | 0,16 | 0,45 | 1,60 | 0,025 | 0,020 | 0,015-0,060 | 0,08 | 0,05 | 0,04 | |
1.8952 | L 450 QB | 450-570 | 535 | 18 | 40 | 0,45 | 0,16 | 0,45 | 1,60 | 0,025 | 0,020 | 0,015-0,060 | 0,09 | 0,05 | 0,06 | |
1.8955 | L 485 QB | 485-605 | 570 | 18 | 46 | 0,45 | 0,16 | 0,45 | 1,70 | 0,025 | 0,020 | 0,015-0,060 | 0,10 | 0,05 | 0,06 | |
1.8957 | L 555 QB | 555-675 | 625 | 18 | 61 | w/uzg | 0,16 | 0,45 | 1,80 | 0,025 | 0,020 | 0,015-0,060 | 0,10 | 0,06 | 0,06 | |
1.0418 | L 245 MB | — | 245-440 | 415 | 22 | 40 | 0,4 | 0,16 | 0,45 | 1,50 | 0,025 | 0,020 | 0,015-0,060 | 0,04 | 0,04 | – |
1.0429 | L 290 MB | StE290.7 TM | 290-440 | 415 | 21 | 40 | 0,4 | 0,16 | 0,45 | 1,50 | 0,025 | 0,020 | 0,015-0,060 | 0,04 | 0,04 | – |
1.0578 | L 360 MB | StE360.7 TM | 360-510 | 460 | 20 | 40 | 0,41 | 0,16 | 0,45 | 1,60 | 0,025 | 0,020 | 0,015-0,060 | 0,05 | 0,05 | 0,04 |
1.8973 | L 415 MB | StE415.7 TM | 415-565 | 520 | 18 | 40 | 0,42 | 0,16 | 0,45 | 1,60 | 0,025 | 0,020 | 0,015-0,060 | 0,08 | 0,05 | 0,06 |
1.8975 | L 450 MB | StE445.7 TM | 450-570 | 535 | 18 | 40 | 0,43 | 0,16 | 0,45 | 1,60 | 0,025 | 0,020 | 0,015-0,060 | 0,10 | 0,05 | 0,06 |
1.8977 | L 485 MB | StE480.7 TM | 485-605 | 570 | 18 | 46 | 0,43 | 0,16 | 0,45 | 1,70 | 0,025 | 0,020 | 0,015-0,060 | 0,10 | 0,06 | 0,06 |
1.8978 | L 555 MB | 555-675 | 625 | 18 | 61 | w/uzg | 0,16 | 0,45 | 1,80 | 0,025 | 0,020 | 0,015-0,060 | 0,10 | 0,06 | 0,06 |